CAN-Gateway development board
Product number:
HW10018.1
Product information "CAN-Gateway development board"
Shipping only to DE, PL
For shipping to other countries see: https://wled.shop(external link)
Description
This product can be used as a development and evaluation board for various purposes. It is based on an ESP32 microcontroller and has the following external interfaces integrated:
- Ethernet (LAN)
- CAN (via 2x RJ45 sockets [pin assignment compatible with CAN-Open standard] and a screw terminal block)
- Micro SD card slot
- Micro USB
- Placement option for a second CAN bus connection (with an MCP2515 and an SN65VHD230 IC)
Due to these features, this product is particularly suitable for developing and building CAN gateways.
A suitable housing is available as an accessory, which also enables installation on a top-hat rail.
Usage information in German: HERE
Usage information in English: HERE
Options available (please select above in the drop-down menu under the price):
- Without additional equipment (without a second CAN, sufficient for most applications)
- With additional equipment: second CAN, for special purposes
Mandatory information:
- WEEE reg. no.: DE34359026
Hazard warnings
- This product is intended for use by persons with relevant electrical engineering knowledge and experience. Incorrect or improper use can be dangerous.
- This product may only be operated with safety extra-low voltage (SELF) (protection class III).
- This product is not a toy! It must be kept out of the reach of children and must not be used as a toy.
- Please note the technical data, especially the maximum current carrying capacity. Overloading may result in the destruction of this product and/or a fire.
- Only install and connect this product when there is no voltage! Make sure the polarity is correct!
- We assume no liability for property damage or personal injury caused by improper use or ignoring of the hazard warnings. In these cases, the warranty claim also expires! For further damages we do not accept liability.
- Keep this usage information digitally or printed so you can always access it.
- To avoid damage, protect this product from electrostatic discharge.
- Any use other than that described in this usage information is not intended and leads to exclusion of warranty and liability.
Recommended
Enclosure for CAN-Gateway boards
€5.99*
Enclosure made from plastic, suitable for CAN-Gateway boards
CAN-Gateway software
€139.00*
For hardware type:
CAN-Gateway dev board by https://wled.shop or compartible
CAN-Gateway software is intended for communication with devices from Hoval AG that are equipped with a "TopTronic® E" (*) controller. This software must be executed on compatible hardware based on an ESP32 microcontroller and then allows:1. Integrate the devices into the home automation system (e.g. Home Assistant, ioBroker, OpenHAB, Domoticz, Loxone etc.). Supported protocols / features:MQTT protocolREST APIModbus TCPHome Assistant MQTT auto discoveryKNX IP multicast/routing (no tunneling)2. Control the devices online from anywhere using the associated Android app / Windows x64 app and read out the current data(**). Features:Encrypted end-to-end connection via the Internet.No cloud / server in between: the app accesses your system directly. So very quickly.3. Log data and save it on an SD card, e.g. for system or error analysis. Features:Data storage can be set flexiblyVarious data formatsWith the CAN gateway you can monitor and control up to 40 parameters in your Hoval devices at the same time.For performance reasons, it is possible to use/activate only one communication protocol (MQTT, KNX IP, REST-API) or data storage on an SD card at the same time. Although parallel use is theoretically possible, it can lead to performance problems and is therefore not guaranteed.Operating manual: CAN-Gateway_operating_manual.pdfWiki: https://github.com/wladwnt/CAN-Gateway/wiki/English-WikiYoutube video: https://www.youtube.com/watch?v=7HJrZkuCv4k** When ordering, please select correctly for which hardware variant (selection area below the price) **Scope of delivery:Binary .bin file for flashing an ESP32 microcontroller. Will be made available for download or by email. The file is linked to a WiFi MAC address of an ESP32 microcontroller that you specify (please send us the WiFi MAC address by email to info@myhome-control.de). Detailed information can be found in the operating instructions.Please read carefully: CAN-Gateway important notesThis software has not been developed or assesed by Hoval AG.(*) TopTronic® is the protected and registered trademark of Hoval AG(**) For access via the Internet, your in-house network must have a public IPv4 address (dynamic, static).