Accessory set for WLED controller board mini (V70, V73)

(Shipping only to: DE, PL) Description: WLED Controller Board mini equipped with an ESP32 microcontroller, level shifter etc.Connectors must be soldered by the customer themselves (e.g. terminal block or LED strips directly). A helpful WLED FAQ can be found at https://wled-faq.github.io / Features: Up to 4 LED strips can be controlled: 4 outputs available (DAT, CLK, DAT2, CLK2, whereby CLK and CLK2 outputs can also be used as data outputs) Very compact: dimensions only approx. 61x26x5 mm Can be used with 5V, 12V or 24V LED strips, no switching necessary Additional interfaces for digital microphone or Line-In-to-I2S Adapter for Sound Reactive WLED Pre-programmed and tested Optional accessory set including housing, plug, header, button etc. available (see accessories) Attention: No returns if the board has already been modified by the customer, e.g. by soldering on components etc. The board is delivered pre-programmed and tested. Please also check the functionality upon receipt before modification. Technical data: Supply voltage: 5...24V Weight: 8.2 g Ambient temperature operation: +5°C … +35 °C Ambient temperature storage/transport: -20 °C … 60 °C WiFi standard: IEEE 802.11 b/g/n, 2.4 GHz Antenna: integrated circuit board antenna 3.4 dBi Mandatory information: WEEE Reg. No.: DE34359026Manufacturer: MyHome-Control von Dr.-Ing. Wladislaw Waag, Wasserburger Landstr. 29, 81825 München Warnings: This product is intended for use by persons with relevant electrical engineering knowledge and experience. This means that the person must be able to correctly dimension the light chain or lighting system to be set up (including, for example, selection of the power supply, the light chain, cable selection, any necessary safety elements) and to set it up using relevant electrical engineering standards. Incorrect or improper use can be dangerous. This product may only be operated with safety extra-low voltage (SELF) (protection class III). This product is not a toy! It must be kept out of the reach of children and must not be used as a toy. Install and connect this product only when there is no voltage! Make sure the polarity is correct! We assume no liability for property damage or personal injury caused by improper use or failure to observe the hazard warnings. In these cases, the warranty claim also expires! We assume no liability for consequential damage. This product is only suitable for use in apartment-like environments. To avoid damage, protect this product from electrostatic discharge.

This controller will not be produced any more. Please select an alternative WLED Controller mini V73 (5-24V) Description: WLED Controller Board mini equipped with an ESP32 microcontroller, level shifter etc.Connectors must be soldered by the customer themselves (e.g. terminal block or LED strips directly). A helpful WLED FAQ can be found at https://wled-faq.github.io / Features: Up to 4 LED strips can be controlled: 4 outputs available (DAT, CLK, DAT2, CLK2, whereby CLK and CLK2 outputs can also be used as data outputs) Very compact: dimensions only approx. 61x26x5 mm Can be used with 5V and 12V LED strips, no switching necessary Additional interfaces for digital microphone or Line-In-to-I2S Adapter for Sound Reactive WLED Pre-programmed and tested Optional accessory set including housing, plug, header, button etc. available (see accessories) Attention: No returns if the board has already been modified by the customer, e.g. by soldering on components etc. The board is delivered pre-programmed and tested. Please also check the functionality upon receipt before modification. Technical data: Supply voltage: 5...12V Weight: 8 g Ambient temperature operation: +5°C … +35 °C Ambient temperature storage/transport: -20 °C … 60 °C WiFi standard: IEEE 802.11 b/g/n, 2.4 GHz Antenna: integrated circuit board antenna 3.7 dBi Mandatory information: WEEE Reg. No.: DE34359026 Warnings: This product is intended for use by persons with relevant electrical engineering knowledge and experience. This means that the person must be able to correctly dimension the light chain or lighting system to be set up (including, for example, selection of the power supply, the light chain, cable selection, any necessary safety elements) and to set it up using relevant electrical engineering standards. Incorrect or improper use can be dangerous. This product may only be operated with safety extra-low voltage (SELF) (protection class III). This product is not a toy! It must be kept out of the reach of children and must not be used as a toy. Install and connect this product only when there is no voltage! Make sure the polarity is correct! We assume no liability for property damage or personal injury caused by improper use or failure to observe the hazard warnings. In these cases, the warranty claim also expires! We assume no liability for consequential damage. This product is only suitable for use in apartment-like environments. To avoid damage, protect this product from electrostatic discharge.